Product Description
The EMG 25K Ohm Volume Control Pot is for use with Active EMG’s pickus. There are 6 header pins, (3 pairs of signal and ground) two of the pairs are for in/out, the third pair is for tone send or daisy chaining. Plug-in compatibility with all EMG Pickup Systems with standard .100 (2.54mm) pin spacing. Input and output solder pads also provided to solder wires directly to the circuit board if the quick connectors are not being used.
- Pot Value/-Taper: 25K-Audio
- Threaded Shaft Length 3/8"
- Shaft Type: Split Knurled - 18 Tooth (coarse spline)
- EMG Volume Control Instructions PDF
