Description
The EMG 25K Ohm Tone Control Pot is for use with Active EMG’s pickus. The tone capacitor is small and is mounted on the pot side of the PC Board. There are 4 header pins, (2 pairs of signal and ground) the two pairs are identical so either can be used for tone control with the second pair for in/out. Plug-in compatibility with all EMG Pickup Systems with standard .100 (2.54mm) pin spacing. Solder pads also provided to solder wires directly to the circuit board if the quick connectors are not being used.
- Pot Value/-Taper: 25K-Audio
- Threaded Shaft Length 3/8"
- Shaft Type: Split Knurled - 18 Tooth (coarse spline)
- EMG 25K Tone Control Instructions PDF
Additional Details
- SKU:
- CPM25-EMGT
