EMG Guitar & Bass Pots

Bourns 25K Audio Pot w/ Push-Pull Switch

Bourns 25K audio taper control pot for electric guitar and bass with double pole/double throw (DPDT) push pull switch. Use with EMG and other active pickups for coils splitting and other functions. Bourns Push/Pull Pot...

Bourns Pro 25K Audio Taper Mini Guitar Pot-Split Shaft

Bourns Pro 25K Audio taper control pot for guitar and bass volume and tone controls. For use with EMG and other active pickups and electronics. Solid brass threaded shaft provides a super smooth rotation feel and extra long service life. Split knurled...

CTS 25K Long Shaft Audio Taper Volume & Tone Pot

CTS 25K Ohm Audio Taper Guitar Pot with Long Shaft. Use on Les Paul and other thick top guitars with EMG or other active pickups. CTS Control Pot Specs Ohms: 25K   Taper: Audio Tolerance: +/-10%   Pot Diameter: 15/16" (...

EMG 1-2 Pickup Solderless Electronics Conversion Kit-Long Shaft

All of the solderless components for install in one package! This kit includes everything needed for installation in a 1 or 2 pickup configuration. Includes 2 volume pots and 2 tone pots for use in guitars with 1-4 control potentiometers. This kit is for...

EMG 25K Long Shaft Tone Pot for Active Pickups w/ Solderless Quick Connectors

The EMG 25K Ohm Tone Control Pot is for use with Active EMG’s pickus. Long Shaft for use in Led Pauls and other guitars with thick tops. The tone capacitor is small and is mounted on the pot side of the PC Board. There are 4 header pins, (2...

EMG 25K Long Shaft Volume Pot for Active Pickups w/ Solderless Quick Connectors

The EMG 25K Ohm Volume Control Pot is for use with Active EMG’s pickus. Long shaft for use in Les Pauls and other guitars with thick tops. There are 6 header pins, (3 pairs of signal and ground) two of the pairs are for in/out, the third pair...

EMG 25K Tone Pot for Active Pickups w/ Solderless Quick Connectors

The EMG 25K Ohm Tone Control Pot is for use with Active EMG’s pickus. The tone capacitor is small and is mounted on the pot side of the PC Board. There are 4 header pins, (2 pairs of signal and ground) the two pairs are identical so either can be...

EMG 25K Volume Pot For Active Pickups w/ Solderless Quick Connectors

The EMG 25K Ohm Volume Control Pot is for use with Active EMG’s pickus. There are 6 header pins, (3 pairs of signal and ground) two of the pairs are for in/out, the third pair is for tone send or daisy chaining. Plug-in compatibility with all...

EMG 3 Pickup Solderless Electronics Conversion Kit

All of the solderless components for install in one package! This kit includes everything needed for installation in a 3 pickup configuration with potentiometers. This kit is for active pickups. Package Includes: 2 Volume Pots 2 Tone Pots 1 12b...

EMG Battery & Pickup Junction Buss for Solderless Pickups

Original EMG 1/4" solderless junction block and battery buss. For use with EMG active and passive solderless pickups and connectors. 

EMG Guitar & Bass Active Pickup Quick Connect Cable-11 Inch

Original EMG brand quick connect active pickup output cable. 11 inch length (typically used for bridge position pickups) Use when connecting EMG quick connect active pickups to EMG quick connect volume and tone pots.  Fits active models of EMG...

EMG Guitar & Bass Active Pickup Quick Connect Cable-14 Inch Bare End

Original EMG brand quick connect active pickup output cable. 14 inch length. Use when soldering EMG quick connect active pickups to standard (non quick connect) volume and tone pots.  Fits active models of EMG guitar and bass pickups with 3 pin...

EMG Guitar & Bass Active Pickup Quick Connect Cable-15 Inch

Original EMG brand quick connect active pickup output cable. 15 inch length (typically used for neck position pickups) Use when connecting EMG quick connect active pickups to EMG quick connect volume and tone pots.  Fits active models of EMG guitar...

EMG Solderless Toggle Switch w/ Connector Cables

EMG low profile solderless 3-way toggle switch designed to fit standard Gibson style guitars. Uses EMG’s “BNOG” connector arrangement for use with solderless pickup systems. Includes 2 cables (short/bridge & long/neck) for easy...

Low Battery Indicator for 9 Volt Active Guitar Pickups & Electronics

PMT LoBat low battery indicator circuit for guitar and bass active pickups and electronics. Use with any brand of active pickups or electronics that uses a 9 volt battery. Micro-circuitry checks the battery when the guitar is plugged in and Flashes the...