Three position toggle switch with 4 poles (12 terminals total) switch functions like 2 double pole On/On/On switches in a single switch (4P3T). Use to select single coils in the middle position with two humbuckers or as a selector on a double neck. Max A/C amperage: 6A @120VAC
3 Reviews Hide Reviews Show Reviews
Very well built switch. Sturdier than the equivalent DiMarzio switch. Copper connectors fit 22 gauge wire perfectly. I would prefer the toggle to be slightly larger (it's the same size as the DiMarzio switch but a bit smaller than the standard Les Paul switch) but it's really not a major issue.
Pros: Very sturdy and very useful.
Cons: A little difficult to solder, and if you don't place it well on the middle position, you have no signal.
I bought this to use on my 5150II as a toggle switch between the original 5150 spec mod, the stock 5150II sound, and an in between setting where I get the tight bass response of the 5150II with the gain and grit of the original 5150. The pinout on this switch allows me to access three different voicings from my 5150II and it can handle 600 volts despite what is written on the switch. With a little bit of drilling on the front panel this switch accomplishes what I wanted to do and I would buy again if I come up with any other bright ideas.